Performance Series’ AutomaticFolder Gluer with Inline PrintInspection – 650ISP, 850ISP

Feeder Section:

1. 6 Feeding belts along with 3 suction belts.
2. Each feeder belt can be adjusted independently.
3. Equipped with adjustable feeding knives -3 Pcs.
4. Equipped with pneumatic vibrator- 1 Pcs.
5. Suction System – 1 Set
6. Motorized friction feeder with independent AC motor.

Aligner Section:

1. Aligner guides the box to a parallel handrail that allows a perfect box alignment.
2. Can register to left or right depending on box.
3. It helps to minimize the waste and reduce machine stoppage due to error in carton which comes from feeder.

Pre-Folding Section:

1. 1^st crease pre-folding 180 degrees
2. 3^rd crease pre-folding 165 degrees
3. Equipped with Nitta folding belts
4. Standard accessories for b-type folding carton.
5. Both upper & lower carrier can be removed while running

4&6 Corner (Optional):

The hook system is driven by servos controlling system with photoelectric sensors to achieve back folding function. It has high precision and good efficiency.

Inline Print Inspection Unit:

The Unit Equipped:

1. Colorful Linear Scan Camera
2. White & Black Linear Scan Camera
3. Photometric Lens
4. Video and Image Capture Card
5. LED Display
6. Advantech Industrial Personal Computer
7. Cree Brand Light Source LED
8. With Precise Suction System
9. Servo System for Positioning

Waste Ejector Section:

When get the defect boxes, the machine will take out automatically from the waste systems.

FS-HornBill-850-P3N1:

Main Configuration

P :  Positive Side Face Print Surface

N：Negative Side Face Print Surface

Inspect Function:

Software Introduction:

1. Automatic extraction of text and patterns, drawing hierarchical parameters.
2. Quick call of history template, fast cutting single.
3. Super strong production and consumption statistical analysis report.

Negative Spacing Mode

Breakthrough the bottleneck of the traditional single-sheet trigger collection mode, eliminates the abnormal trigger acquisition logic, and increases the production capacity by more than 30%

Braille (Optional):

The braille is the solution for the rotary embossing on the boxes in folder gluer. The embossing realized in the folder gluer allows great benefits, including:

1. The uniform pressure on every score (“dot”) punched without any delay, sometimes necessary, on die-cutters to obtain quality embossing.
2. The possibility to emboss without problems also close to the creasing.
3. The possibility to vary the embossing pressure depending on grammage and on cardboard fiber or on the needs of the final consumer.
4. Braille is the most versatile braille rotary solution patented on the market to realize the embossing of pharmaceutical boxes in 4 and 5 lines of braille with single or double layer in folder gluer.
5. The braille molds are made by CNC machine.

Braille Specifications:

1. Unique design of female and male braille cylinder to avoid high maintenance cost.
2. Braille Precision – 0.03
3. Finished Dot Height – Max. 0.23mm
4. Finished Dot Diameter – 1.8 mm
5. Front Position Precision – +/- 1.5 mm.
6. The maximum Braille Speed – 200m/min

Crash Lock Section:

1. 4 Set of folding fingers to fold flaps and panels.
2. Three upper & lower carrier.
3. Standard accessories for b-type crash lock cartons.

Glue System:

1. Equipped with standard left/right side gluing tank.
2. Equipped with advance gluing tank with unique scrapper device with micro-metric adjustment for precise gluing.
3. Easy to remove all equipment for quick cleaning.
4. Standard 3mm glue disc (optional glue disc width 4,6,8,10mm).
5. Upper gluing can be done with electronics glue guns.

Folding & Closing Section:

1. Main motor controlled by frequency speed variation.
2. Smooth and accurate folding of 2^nd & 4^th
3. Three set of upper and lower carrier, they are drive, middle and control side of machine.
4. Left and right outward folding belts speed can be micro adjusted to increase folding accuracy.
5. Equipped with branded folding belts.

Trombone Section:

1. Upper & lower drive mechanism for box length adjustment.
2. Equipped with automatic belt tension adjusting system.
3. Upper arm set can be adjusted backward and forward to ensure a continuous and automatic box collection mechanism.
4. Equipped with a control screen for operating the machine.
5. Single and easy operation for upper, down expansion adjustment, left or right twin board moveable for piling.
6. Batch counter equipped with pneumatic kicker.

Delivery Section:

1. Upper conveyor can be moved forward and backward, depending on the box length.
2. Conveyor pressure can be adjusted pneumatically.
3. With new structure, it can run automatically with accountable sensor pile the boxes for high efficiency.
4. Longer delivery length 4.5 meter with 3-meter effective pressing length.